Just enter your text, and the editor will generate your HTML code automatically. Select
the "HTML" button to copy and paste the code into your page. This is a great tool for those who want to practice.
Basic Text & Font Tags
Before
I get started, you should know that HTML code almost always uses beginning and ending tags. These tags surround the
text that will be affected by the code.
A beginning tag is generally a word surrounded by brackets. The closure tag is
surrounded by the same brackets but with a forward slash right after the opening bracket.
For example, if you want to bold a portion of a sentence, then you would use <b>
for the opening tag and </b> for the closing.
Let’s say you want to bold the word "Hello!" in the sentence below. Then
your HTML code would look like this:
<b>Hello!</b> My name is Carla.
The output would be:
Hello! My name is Carla.
Only the word "Hello!" is bolded because the tags surround that word. If
you wanted to bold the entire sentence, then you would have put the closure tag, </b>, after the word "Carla".
Be sure to always include your closing tag because if you forget, your entire page will be affected by the tag.
You can apply this same concept to many other HTML codes. Here are several
of the basics...
Here you will see a sample HTML page with the basic structure.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<html>
<head>
<title>Title that is displayed at the top of your web browser and also used
as the title by many search engines</title>
<meta name="description" content="10-15 word description of your site read by
some search engines">
<meta name="keywords" content="main keywords of your site separated by commas.
Read by some search engines">
</head>
<body>
<p align="left">
This is my new web page. I hope you like it. Please come back and visit again.
If you need help creating your web site visit <a href="http://www.2createawebsite.com">2 Create a Website.com</a>.
</p>
</body>
</html>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The <html> tag just tells the browser where the HTML starts. It is not necessary
to include this tag to get your page to show.
The <title> tells your browser the title of the page and you’ll see
this text at the very top of your web browser. This is also used by most search engines when indexing your page. Whatever
text you have here will be title of your site when displayed in the search engines.
The <meta name> information is also somewhat useful for some search engines.
They may use whatever is in your "description" tag to describe your site. Others may randomly take an excerpt of the <body>
of your page for a description of your site. The keyword tag may also be helpful with your ranking in some engines. Insert
3 or 4 of your main keywords or keyword phrases separated by commas here.
A few years ago, the <meta name> information was quite crucial in getting
a top listing with the search engines. However, things have changed drastically with the explosion of so many new sites and
the fact that many people abused it. I would still recommend using these tags but don’t expect to get a top ranking
because of them.
The body of your site should be included inside the <body> tags.
Need Help With Your Design?
I have some pretty cool, FREE HTML templates you can download. Just select the design you want, download the files to your desktop, edit them
on your PC to start designing your site.
Hyperlinks are links that take you to another page or web site. You create them
by using the code below:
<a href="http://www.thepage.com">Name of link</a>
The link would appear as, Name of link
Open Links in a New Browser Window
If you don’t want people to leave your site completely when they click on
links to other sites, you can set the link to open up a new window. The "target" attribute allows you to do this:
<a href="http://www…… "target="_blank">
Absolute vs Relative URLs
URL is another name for a web site address and stands for Uniform
Resource Locator.
There are two different types of URLs you can use to link to various pages, absolute
and relative.
Absolute URLs
Absolute URLs include the complete path to the file’s location, including
the names of all the directories and subdirectories.
Let’s say you have a folder inside your web site's root directory called
"music" and you want to link to a page inside the "music" folder called brahms.html.
If you don’t want to ever have to worry about going back and editing your
hyperlinks if your site structure changes then relative URLs are the way to go.
Relative URLs are more or less like shorthand that tells the browser to go backward
one or more directories to find the file.
Let's say you're on the page we referenced above, brahms.html (located in the "music"
folder) and you want to link back to the home page: (http://www.yoursite.com/index.html)
Using a relative URL, you would tell the browser to go back 1 directory by using
the dot-slash method.
<a href="../index.html">Home</a>
The two dots followed by a slash instructs the browser to go up 1 more level to
get to the main (root) directory.
Changing the Hyperlink Colors
The default color for hyperlinks on an HTML page is blue, but you can change it
to whatever color you'd like by using the link code inside the <body> tag. Here's an example:
<body link="green" vlink="yellow" alink="purple">
In the above example, hyperlinks will be green, links that have
already been visited will be yellow and active links will be purple. (An active link is one that has just been clicked,
so for a split second the link will change colors as the mouse activates it).
Creating Email Links
Creating email links are just as simple. All you need is the "mailto" function
to get this to work properly:
If you want to create a link that will take the visitor to another section of the
same page (rather than a new page or site), then you can create an anchor link. There are two steps to this process:
1) First, go to the place in your HTML code where you want the anchor to go.
This is the spot on the page that the browser will move to when a person clicks on the link.
Insert the code <a name="name1">This is the Text Where the Anchor Will Land</a>
"name1" is just the name of the anchor I chose. You can all it anything you want.
2) Now to link to that section of the page, use the hyperlink code:
<a href="#name1">click here</a>
Now when your visitors click on that link, they will be taken to that section of
the page.
Easy Web Design - No HTML Needed Powweb web hosting offers 12,000 MBs of space for only $7 per month AND you get a free web page builder with
built-in templates. Try them today!
Understanding tables, in my opinion, is one of the important lessons you can learn.
Tables are such a fundamental part of web page layouts, and you can do so much with your page design if you understand how
they work.
If you see a web page with a left navigation, usually that page is created by using
one big table with two columns and no border. The left column is generally set to a smaller amount than the right column,
thus setting up the left navigation.
Basic Table Tags
The three most important tags for tables is the opening table tag, <table>
and the table row and table data tags - <tr> and <td> respectively.
The <tr> tag represents a row for the table
The <td> tag represents a cell inside the row.
Now, with that in mind, let's create a simple table:
<table>
<tr> <td>A</td> <td>B</td> <td>C</td>
</tr>
<tr> <td>X</td> <td>Y</td> <td>Z</td>
</tr>
</table>
And this is what the table would look like published:
A
B
C
X
Y
Z
Notice that by looking at the code, you can tell how many rows and columns are
included just by looking at the code. The two opening <tr> tags indicate two rows and the three opening <td>
tags on each line represents three data cells (or three columns).
Adding Table Borders
Adding a border simply involves inserting the border attribute to the opening table
tag. So in the above table the code would be adjusted accordingly:
<table border="2">
<tr><td>A</td> <td>B</td> <td>C</td>
</tr>
<tr><td>X</td> <td>Y</td> <td>Z</td>
</tr>
</table>
Notice the "2" represents the thickness of the border. If you had set it to "0"
then there would have been no border at all. If you wanted it very thick then you could set it to 8, for example. So
now your table will look like this:
A
B
C
X
Y
Z
Changing a Table's Border Color
You can change the color of a table border by simply adding the bordercolor
attribute.
<table border="2" bordercolor="red">
<tr><td>A</td> <td>B</td> <td>C</td>
</tr>
<tr><td>X</td> <td>Y</td> <td>Z</td>
</tr>
</table>
And here's what it would look like...
A
B
C
X
Y
Z
Adjusting Table Cell Spacing and Cell Padding
You can increase the space within the table cells and the space between the cells
by using the cellpadding and cellspacing attributes.
The cellspacing attribute adjusts the space between the cells and cellpadding
adjusts the space within (around) the cell.
See how setting the cellspacing attribute to "10" drastically increased the spacing
between the cells, and the cellpadding attribute set to "3" added a little of space within each individual cell.
Specifying a Table Width
You can specify the width of a table by using either a percentage or a pixel width.
<table width="100%" border="2">
<tr><td>A</td> <td>B</td> <td>C</td>
</tr>
<tr><td>X</td> <td>Y</td> <td>Z</td>
</tr>
</table>
Since the width is set to 100% that means the table will take up 100% of the screen
and the columns in the table will be adjusted evenly. Here's what it would look like.
A
B
C
X
Y
Z
As we mentioned, you can also set the table width using pixels instead of percentages.
So instead of setting it to 100%, you could set it to 300 pixels:
<table width="300" border="2">
<tr><td>A</td> <td>B</td> <td>C</td>
</tr>
<tr><td>X</td> <td>Y</td> <td>Z</td>
</tr>
</table>
The table would look like this:
A
B
C
X
Y
Z
Setting Column Widths
Sometimes you may not always want your columns to be the same size. If this
is the case, you need to set values on your table data <td> cells. Again, you can set them by using percentages
or pixel widths.
See how the column width for the first column in both rows is
set to 70%. Notice there is no value set for the other 2 columns. If you do not set a value for the remaining
columns, their width will automatically be adjusted to take up the remaining space and they'll share it equally.
Since the table width is set to 300 pixels, and the first column
is instructed to take up 70% of those 300 pixels (roughly 210 pixels), the other 2 columns divide the remaining 30% of the
table (roughly 45 pixels a piece).
You could also have expressed the column widths of this table
in pixels instead of percentages. The code would have looked like this:
See how the width of the columns in each row add up to 300 (210 + 45 + 45) -- which
is the width of the table.
What's the Difference Between Using Percentages and Pixel Widths
Many people prefer to express their table width and column widths in percentages
because that will ensure that the table takes up the same amount of screen no matter how big or small the screen resolution
is.
If someone is using a 21 inch monitor to view your site and you have a table width
set to 300 pixels, the table will show up very small on their screen. However if you set the table width to 70%, it
will take up 70% of the screen no matter what size the person is using.
So it's really up to you to decide what's the best layout for your tables.
Specifying a Table's Height
You can also set the table height by adding the height tag to the table code.
See how the first column is aligned to the center? You can also right align
the columns by using the align="right" inside the <td> cells.
Vertically Aligning the Content Inside the Table Cells
So far we've kept the table cell alignment at the default, which is the middle.
Notice in the above table that the A, B, and C are all three aligned in the middle of their cells. Well you can change
their alignment to either top, bottom, or middle by using the valign (which stands for vertical align) tag:
I've set the table height to "250" so the alignment would be more noticeable. Notice
that the A in both rows are aligned to the top. You can also align to the "bottom" or the "middle".
Creating a Left Navigation Layout With Tables
As we mentioned earlier, most left and right navigations are created using tables.
All you do is create a table with one row, two columns and no border. Then align both of your columns to the top (using
the valign tag) so your text will start in the top of the columns, not the middle. Then depending on if you're
going to have a right or left navigation, you'll make one column significantly smaller than the other.
Notice I set the border to "0" but it's still showing in the example. I just
did that to show how the layout would look. If you set your border to "0" you won't see any lines around your table.
So there ya have it! That's a general overview of tables. There's so
much more you can do with them, but if you can understand the basic layout, you'll be able to do so much with the design of
your web site.
Once you have the image you want to use you can insert it into your web page.
Next you’ll need to do is upload the graphic to your web server. Your
web hoster will either provide the environment for you to upload your images or you'll have to use an FTP program.
When you upload the graphic, make sure you pay attention to what folder you’re
putting it into because that will affect how you write the HTML.
Let’s say you upload the graphic called "apple.gif" to your "images" folder
on your web server. The image folder is located inside your "root" directory.
Your HTML code will look like this:
<img src="images/apple.gif">
Now let’s say you have uploaded the graphic to the "fruit" folder/directory
that is located inside of the images folder then the code would appear as:
<img src="images/fruit/apple.gif">
The Alt Tag
If you want text to pop up when you run the mouse over the graphic, then you need
to add the alt tag.
<img src="images/apple.gif" alt="This is my apple">
Specify Height and Width
If you want to adjust the height and width of the image then you need to use the
height and width tags:
<img src="images/apple.gif" alt="This is my apple" height="100" width="150">
It is recommended that you always include the height and width of your images because
it makes your pages load faster.
Adding a Border
To add a border to your image need the "border" attribute. It’s very simple:
<img src="images/apple.gif" border="5"> The 5 represents the thickness of
the border. The higher the number, the thicker the border. The number 0 is equivalent to no border. Or you could just
leave the border attribute out if you do not want one.
Multiple Attributes
Let’s say you want your graphic to have a border of 2, be 100 x 250 pixels
(height x width) and have an alt tag:
<img src="images/apple.gif border="5" height="100" width="250" alt="This is
my apple">
Please note that it does not matter what order you put the attributes in (border,
alt, etc.). Just make sure you do not leave out any of the punctuation.
"Help, My Graphic Won’t Show!"
If your graphic does not show up and you receive the "broken image" icon, check
the following:
Make sure the file is uploaded and is actually in the directory you are pointing to in your HTML code.
Check the case of the actual filename. If you saved the file as "APPLE.gif"
but typed "apple.gif" in the HTML code then the image will not show. Case does matter.
Check your HTML code and make sure you have included all the punctuation.
Creating a Clickable Image
Linking images is helpful if you have buttons or banners on your site and you want
the visitor to be taken to another web page or site when they click on the image. To accomplish this, use the following code:
If used properly, backgrounds can really enhance your site. If used incorrectly,
they can make your site very difficult to read.
If you plan to use a "loud" background that you think is cool, be sure to keep
your visitors in mind. Even though you may love it, it may be distracting for the average visitor and you certainly do not
want a background that takes away from your text.
In general, try to use light backgrounds on dark text.
To insert a background color on your web page, use the following code INSIDE your
<body> tag:
<body bgcolor="red">
You can specify any color, or you can use a hex value.
Inserting a Background Image
If you want an image for your background then you would use the background and
image tag together:
<body background="images/weave.gif">
Keeping in mind that "images/weave.gif" is the location of the graphic. So you’re
telling the browser that the graphic is located in your images folder off the root/main directory. You can also use
the absolute path to your image. For example, http://www.yourdomain.com/images/weave.gif
Hex values are used for generating colors other than the standard reds, blues,
greens, yellows, purples, etc. As you learned above, to specify a purple font you just use the tag <font color="purple">.
But HTML doesn't understand colors like "sky blue" or "pea green" so if you want
these kinds of colors, you need to specify a hex color value.
The hex color code chart below will give you the HTML code you need for your desired colors...
1. Drag the bar on the "Hue" selector to generate the desired base color.
2. Next double click inside the Brightness/Saturation grid to activate the cursor.
Drag it until the desired brightness is achieved.
The "Swatch" bar shows you the final color result.
3. The Hex Color Code is generated at the bottom of the grid. Simply copy and paste
the code into your page.
To indent your text about an inch to the right, simply use the open and closing
<blockquote> tag around the text you want to indent.
<blockquote> This text will be indented indented </blockquote>
See how the code makes the text in the paragraph below behave:
sample text sample text sample text sample text sample text sample text
sample text sample text sample text sample text sample text sample text sample text sample text sample text sample text sample
text sample text sample text sample text sample text
Horizontal lines are great for breaking up paragraphs of text or separating
sections of your page.
To create the standard/default horizontal line, you'll just simply insert
the <hr> code. This will create a line that looks like this:
Setting Horizontal Line Width, Size and Color
To set the width of your line, simply add a "width" attribute. For
example, <hr width="250"> will create a line that is 250 pixels wide. See below...
You can also set the size of the line by inserting a value. So if you
wanted a line that is 250 pixels wide and 6 pixels thick, you'd use the following code:
<hr width="250" size="6">
This will produce the line below:
Lastly, you can control the color of the line by inserting the color attribute:
<hr width="250" size="6" color="blue">
You may also use hex colors to define the color of the line.
Probably
one of the easiest forms to setup is the FormMail form. However, in order to make this work your site must be hosted
with a host that allows you to upload files to your cgi bin.
If you are not sure about this, contact your web hoster.
Next, download the formmail script and follow the instructions provided. Once you've edited the script as necessary, upload/save it to your
site's cgi bin folder on your web server. If you do not have a folder named "cgi bin", then you can create a new folder/directory.
Then change the permission of the file to 755 (CHMOD 755). If you need
help with uploading and changing permissions see the WSFTP tutorial.
HTML Code for Forms
Once the FormMail file is in place on your server, all you have to do is create
a page with the form code to make it work.
Below you'll find the code for creating a form in which your visitors can fill
out and the results will be emailed to your email address.
The form has the following fields:
Text box
Password Field (hidden text)
Check Box
Radio Buttons
Here is what the form will look like and below you will find the HTML code.
You will need to change some variables (in red) to customize it to your own needs.
Here's the code for the form you can copy and paste. Feel free to remove
the HTML code for fields you don't need or adjust the various values to fit your liking.
Notice the red text. This is what you need to edit to customize the form.
1) The 1st line should be changed to the address of the FormMail script on your
server. 2) The 2nd line should be the address of the page the user views after they submit the form. You may need
to create this page. 3) The 3rd line is the email address the form results will be sent to. 4) The 4th line is the subject
of the email when the form is sent to your address.
<p>How Old Are You? <input TYPE="radio" NAME="Age" VALUE="0-25"
checked>0-25 <input TYPE="radio" NAME="Age" VALUE="26-50">26-50 <input TYPE="radio" NAME="Age" VALUE="50
and over">51 and Over </p>
<p>Comments: <br> <textarea NAME="comments" ROWS="10"
COLS="50" wrap="virtual"> You can insert default text here if you wish </textarea> </p>